Front Door With Grid

Sale price

Regular price $ 18.99
( / )
MADE IN THE USA

The Front Door with Grid is the replacement door panel for the BetterVent Indoor Dryer Vent, complete with the built-in support grid for filters. If your BetterVent’s front door has been damaged or cracked, this part allows you to make your unit like new again. It easily snaps into the hinges on the front of the BetterVent housing, restoring a secure closure and proper seal. The integrated grid provides a sturdy frame for the screen and polyester filters, ensuring they stay in place during operation.

BetterVent Replacement Front Door: Restore Your Dryer Vent’s Secure Closure

Made from tough, high-quality ABS plastic (the same material as the original), this door is built to withstand repeated opening and closing as you maintain your vent. Keep your indoor dryer vent operating safely by replacing the front door when needed – installation is quick, and the difference in performance is immediate.

Perfect OEM Fit: This genuine BetterVent front door is engineered to match the original unit’s specifications. It aligns with the hinges and latches exactly, guaranteeing an air-tight fit that prevents lint and dust from leaking out into your laundry room.

Built-In Filter Grid: The replacement door comes with the integrated grid (grille) that supports both the screen filter and the polyester filter. The grid’s pattern maximizes airflow while securely holding filters in place, so your BetterVent continues to capture lint efficiently.

Durable ABS Construction: Molded from heavy-duty ABS plastic, the door is heat-resistant and impact-resistant. It can handle the warmth of dryer exhaust and the rigors of regular use. This sturdy construction means a long service life, even with frequent filter changes and cleanings.

Easy Snap-On Installation: No tools are required to replace the door. Simply align the new door’s hinge pins with the BetterVent unit’s slots and snap it on. In seconds, your dryer vent is ready to use. The design ensures that anyone can replace the door without hassle or technical skills.

Secure Latching: Once installed, the door works with your BetterVent’s latches to close firmly and stay closed during dryer operation. A secure door means optimal pressure is maintained inside the vent for filtering, and it prevents the door from popping open due to airflow or lint accumulation.

Aesthetics & Maintenance: The front panel has a clean, neutral gray/white finish that matches your BetterVent device, keeping a neat look in your laundry space. It’s also easy to wipe clean during routine maintenance. (Plus, it’s Made in the USA, reflecting quality you can trust.)

Revive Your BetterVent: Instead of buying a whole new vent kit, you can simply replace a broken front door, saving money and extending the life of your BetterVent Indoor Dryer Vent. This replacement door makes your vent function like new, ensuring it continues to protect your home from lint and dust.

Safe and Reliable Operation: A intact front door with a proper latch is crucial for dryer safety. It ensures that all lint stays within the filtration system. By installing a new door, you eliminate gaps or loose closures where lint could escape, thus keeping your laundry area cleaner and reducing fire hazard from stray lint.

Easy Upkeep of Filters: The integrated grid holds your filters correctly, so you’ll get maximum filtering performance. You’ll find it easier to check and replace filters when the door is working properly – it opens smoothly and closes securely every time, making maintenance a quick, hassle-free task.

Quick Fix, Minimal Downtime: If your BetterVent’s door was damaged, replacing it with this snap-on part literally takes minutes. You can get back to doing laundry right away without waiting for complex repairs. This means less interruption to your routine and continued energy savings from using your indoor vent.

Quality Assurance: As an official ADR Products component, this front door replacement offers peace of mind. It’s built to the same standards as the original, so you know it will perform reliably. Plus, the fact that it’s made in America means rigorous quality control, supporting domestic manufacturing and jobs.

Quantity: 1 front door panel with attached filter grid (hinge pins integrated)

Material: High-strength ABS plastic (heat-resistant and UL-rated for appliance use)

Color: Light gray (matches the BetterVent unit’s color scheme)

Compatibility: Replacement for BetterVent Indoor Dryer Vent – fits all standard ADR BetterVent units (for electric dryers)

Dimensions: Approximately 10” x 12” front panel size (covers the BetterVent’s front opening completely)

Installation Method: Snap-in hinge design; no screws or tools needed. Simply remove the old door and attach the new one to the existing hinge slots

Included Features: Built-in filter support grid for holding the screen and polyester filters; works with existing latch mechanism (latches not included – sold separately if needed)

Made in USA: Yes, manufactured domestically by ADR Products for guaranteed compatibility and quality

Click here to be notified by email when Front Door With Grid becomes available.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

The Front Door with Grid is the replacement door panel for the BetterVent Indoor Dryer Vent, complete with the built-in support grid for filters. If your BetterVent’s front door has been damaged or cracked, this part allows you to make your unit like new again. It easily snaps into the hinges on the front of the BetterVent housing, restoring a secure closure and proper seal. The integrated grid provides a sturdy frame for the screen and polyester filters, ensuring they stay in place during operation.

Key Features

What Our Customers are Saying